PPC dust collector is a large-scale dust removal equipment with large air volume, good dust removal effect, high dust removal efficiency, reliable operation, convenient maintenance, and small footprint. Used in metallurgy, electric power, chemical, building materials and other industries. It is mainly composed of ash hopper, filter chamber, clean air chamber, bracket, lift valve, and ash blowing device. When working, the dust-laden gas enters the ash hopper through the air duct, the large particles of dust fall directly into the bottom of the ash hopper, and the smaller dust enters the filter chamber with the airflow turning upwards, and is blocked on the outer surface of the filter bag, purifying the flue gas Enter the bag, enter the air outlet through the bag mouth and the clean air chamber, and then discharge from the air outlet.

Performance characteristics

1. High dust collection efficiency. After purification, the dust concentration of the exhaust gas is ≤50mg/Nm3, and the dust collection efficiency is ≥99.9%.

2. High degree of automation. It adopts microcomputer automatic control technology, separates the ash, and automatically discharges and discharges ash.

3. Advanced technology. Based on the introduction of American Fule Company technology, it is developed by absorbing the advantages of German dust collection technology and combining with my country's national conditions; it combines the advantages of dust collectors such as reverse blowing and pulse injection to overcome the insufficient kinetic energy intensity during reverse blowing and pulse injection The shortcomings of simultaneous filtration and dust removal increase the adaptability of use and improve the efficiency of dust collection.

4. High operating rate. The bag can be changed in separate rooms, maintenance is not stopped, simple and convenient, and the operation rate of the host can reach 100%.

5. Long service life. Using high-quality pulse valve, high efficiency, stability, long service life, equipped with high-quality needle felt filter material, the average life of the filter bag is more than two years.

6. Strong adaptability. It can directly process dust-containing gas with an inlet concentration of up to 1300 mg/Nm3. It can be used as a dust removal device for purifying gas, and it can also be an O-sepa high-efficiency separator, vertical mill and other supporting finished product recovery equipment. This series of dust collectors can handle dust of different properties if they are equipped with specially treated needle felt filter materials or filter media of special materials; if equipped with antistatic filter materials, they can handle high-concentration coal dust.