Horizontal electrostatic dust collector is dust collecting equipment used in rotary kiln. ZK is a professional horizontal electrostatic dust collector manufacturer. The following main introduce the maintenance of horizontal electrostatic dust collector.

To enter into the horizontal electrostatic dust collector for maintenance, we must first determine whether to cut off the power. Before entering the Horizontal electrostatic dust collector to the grounding wire connected to prevent its internal residual electrostatic. The manhole entrances are equipped with a grounding device on-line.

Horizontal electrostatic dust collector in the daily maintenance of the most afraid of corrosion. In some cases the dust-laden gas has more or less moisture. When the gas temperature is low, the gas in the Horizontal electrostatic dust collector condensation, so that it is easy to make Horizontal electrostatic dust collector corrosion. Therefore, special attention to the operation of the exhaust temperature and pressure, exhaust temperature as high as possible to a certain value above the dew point, the lower the absolute pressure of the gas, the gas dew point is lower.

The top of the horizontal electrostatic dust collector has a number of concave drainage groove, due to rust and dust deposition, will drain the plug, so silt discharge is more difficult, thereby exacerbating the case of corrosion. In the top of the Horizontal electrostatic dust collector, but also pay attention to observe all manhole, explosion holes, flanges and other seams there is no leakage. In the process of downtime, to check whether there is internal corrosion, abnormal knot material, accumulate material. Check the plate, polar line whether bending, deformation or too close to the anomaly.

If you are interested in horizontal electrostatic dust collector price, please contact us.